This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
hstarwiki:cust:gen:chip [2016-11-21 T 19:27] admin [Code with Pins] |
hstarwiki:cust:gen:chip [2017-03-07 T 23:59] (current) admin |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * http:// | * http:// | ||
| - | ==Default login== | + | ==Usuefull tools on known system== |
| - | User: root p:chip | + | * Debian based but own system |
| + | * uses systemd | ||
| + | |||
| + | |||
| + | ====== Chip via tty ====== | ||
| + | Pin out: | ||
| + | * Black (Blue) to grnd | ||
| + | * White to Tx | ||
| + | * Green to Rx | ||
| + | Command: | ||
| + | * $dmesg | grep tty | ||
| + | * find tty dev name, like / | ||
| + | * $picocom -d 115200 / | ||
| + | Default login | ||
| + | * User: root | ||
| + | * p:chip | ||
| + | Basic Wifi setup: | ||
| + | * sudo nmcli device wifi connect '(your wifi network name/ | ||
| + | |||
| + | |||
| + | tty info: | ||
| + | * Baud Rate (Data Rate): 115200 | ||
| + | * Data Bits: 8 | ||
| + | * Parity: none | ||
| + | * Stop bits: 1 | ||
| + | * Flow control: none | ||
| ======GPIO on CHIP====== | ======GPIO on CHIP====== | ||
| - | Relaxing Natural Bug bot | + | ====Relaxing Natural Bug bot==== |
| Steps: | Steps: | ||
| * Testing and documenting should be done at each step | * Testing and documenting should be done at each step | ||
| Line 26: | Line 51: | ||
| * Understand how to get more power | * Understand how to get more power | ||
| * Writing Scripts in Python | * Writing Scripts in Python | ||
| + | * Understand GPIO python libraries : | ||
| * Testing with other items such as: | * Testing with other items such as: | ||
| * Motor | * Motor | ||
| Line 34: | Line 60: | ||
| * gyro | * gyro | ||
| * wall sensor | * wall sensor | ||
| + | * gps | ||
| + | * wireless rx and tx | ||
| + | * Enclosure | ||
| + | * Natural surface | ||
| + | * Walking (I do not want rolling) | ||