• The basic chip guid and documentation is here: http://docs.getchip.com/chip.html
• If you want to know how to boot into console, or to change back to grapical, jump to here: http://docs.getchip.com/chip.html#boot-into-console

User: root p:chip

Relaxing Natural Bug bot Steps:

• Testing and documenting should be done at each step
• Activate GPIO on chip
• Understand commands for GPIO
• Understand electrical current
• Build breadboard circuit (Done)
• Turn on lights
• Make script for fading lights (1 for on, one for off)
• Make script to run at certain times
• Build physucal structure for setup
• Create system for alarm variables (web interface)
• Create App to set alarms and other variables
• Refine app for visual appeal
• Create system for adding wifi to chip (maybe bluetooth?)
• Possible flash chip for lighter config

• Unordered List Itemhttp:docs.getchip.com/chip.html#gpio Note: first section explains about the different kernals and what may need to be done to accomidate. Bassically there is a number to each pin, but where that number starts is dependent on the kernal.
  The link gives you a script to accomidate this.
  In our case, we are in kernal 4.3 so have gpiochip408. (not sure if this applies to all pins but:) * For XIO-P0 - P7 you add to 408 to corrispond * ex: P7 is gpio415 2017-07-17 * Followed most of tuturial and could get LED on, but it was not very bright * Also, not sure how to do PWM so need to do some more work