Here is some information about using the Lorex Vantage LNR380

• The lorex Vantage LNR380 allows for you to view cameras connected directly to the DVR or connected through wireless radios
• Some of the key features of the DVR is a large Hard drive that allows you to record many hours, days of continuous videos, IR cameras for night vision, and access via computer and from a remote location

Client Software can be downloaded here:
http://www.lorextechnology.com/security-dvr-and-surveillance-dvr/LNR300-Series-Security-NVR-with-Real-Time-1080p-Recording/prod410019.p#downloadsTab

• Go to link
• Download the software for your Operating System
• For Apple, The Safari Pugin is easier to use
• Install software and run
• There is a wizard on how to set up your camera system

• Go to the address your technician has provided you. Should be an IP address and a port such as:
• 200.100.50.25:85 (example for outside of a network)
• 192.168.1.80:85 (example for inside a network)
• Enter login and password provided
• You may need to download a plugin to view system.
• You may also need to enable web content by right clicking (ctrl+click for apple) over the live view area and choosing “Run this plug-in”

• In the browser you can do live view or play back to review or download a clip.
• You will need to add the cameras by clicking on the box you want a camera to go, and then double click the corresponding camera on the list on the left.
• To review video simply go to playback, choose the camera, choose the date, and then go to search. Now you can play back video. You can move to a different time of that day by dragging the bottom timeline.

• Open LorexNetHD application
• For simple Live viewing, click “Main view”
• For reviwing, Go back to Control Panel and choose “Event Search”
• On the left, set parameters of camera, date and time you are looking for
• Click Search
• Double click on time clip you want to view
• You can right click on the video and choose download to download the video to your video or movies folder. Just check the clip or clips you want and choose Download. Be patient with video.

The following information my help with setting up the LNR380. This is mostly for installation technicians

One of the best troubleshooting tips is to reboot the system if it seems to be malfunctioing. Simply switch off the powerstrip it is plugged into, or unplug it from the wall. It will not harm the system. The power it back on after about 10-20 seconds. Give it about 5 minutes to reboot.